Küppersbusch IKE458-54T Manuel d'utilisateur télécharger pdf (Page 44)

If this appliance featuring magnetic door seals is

to replace an older appliance having a spring

lock (latch) on the door or lid, be sure to make

that spring lock unusable before you discard the

old appliance. This will prevent it from becoming

a death-trap for a child.

Location

The appliance should be installed well away from

sources of heat such as radiators, boilers, direct

sunlight etc.

For buiding into the kitchen units follow the special

“Building-in” instructions given.

Electrical connection

Before plugging in, ensure that the voltage and

frequency shown on the serial number plate

correspond to your domestic power supply. Voltage

can vary by ±6% of the rated voltage.

For operation with different voltages, a suitably sized

auto-transformer must be used.

The appliance must be earthed.

The power supply cable plug is provided with a

contact for this purpose.

If the domestic power supply socket is not earthed,

connect the appliance to a separate earth in

compliance with current regulations, consulting a

specialist technician.

The Manufacturer declines all responsibility if

the above safety precautions are not observed.

This appliance complies with the following

E.E.C. Directives:

- 87/308 EEC of 2/6/87 relative to radio interference

suppression.

- 73/23 EEC of 19.2.73 (Low Voltage Directive) and

subsequent modifications;

- 89/336 EEC of 3.5.89 (Electromagnetic

Compatibility Directive) and subsequent

modifications.

Important

It must be possible to disconnect the appliance from

the mains power supply; the plug must therefore be

easily accessible after installation

INSTALLATION

1 2 ... 39 40 41 42 43 44 45 46 47 48 49 50 51 52

Pas de commentaire

Küppersbusch IKE458-54T Manuel d'utilisateur Page 44