Küppersbusch IKE236-0 Manuel d'utilisateur télécharger pdf (Page 22)

Periods of non-operation

When the appliance is not in use for long

periods, take the following precautions:

•

disconnect the appliance from elec-

tricity supply

• remove all food

•

defrost

10)

and clean the appliance and all

accessories

• leave the door/doors ajar to prevent un-

pleasant smells.

If the cabinet will be kept on, ask some-

body to check it once in a while to prevent

the food inside from spoiling in case of a

power failure.

What to do if…

Warning! Before troubleshooting,

disconnect the mains plug from the

mains socket.

Only a qualified electrician or compe-

tent person must do the troubleshoot-

ing that is not in this manual.

Important! There are some sounds during

normal use (compressor, refrigerant

circulation).

Problem Possible cause Solution

The appliance does not

operate. The lamp does

not operate.

The appliance is switched off. Switch on the appliance.

The mains plug is not connected

to the mains socket correctly.

Connect the mains plug to the

mains socket correctly.

The appliance has no power.

There is no voltage in the mains

socket.

Connect a different electrical ap-

pliance to the mains socket.

Contact a qualified electrician.

The lamp does not work. The lamp is in stand-by. Close and open the door.

The lamp is defective. Refer to "Replacing the lamp".

The compressor oper-

ates continually.

The temperature is not set cor-

rectly.

Set a higher temperature.

The door is not closed correctly. Refer to "Closing the door".

The door has been opened too

frequently.

Do not keep the door open longer

than necessary.

The product temperature is too

high.

Let the product temperature de-

crease to room temperature be-

fore storage.

The room temperature is too

high.

Decrease the room temperature.

Water flows on the rear

plate of the refrigerator.

During the automatic defrosting

process, frost defrosts on the

rear plate.

This is correct.

Water flows into the re-

frigerator.

The water outlet is clogged. Clean the water outlet.

Products prevent that water

flows into the water collector.

Make sure that products do not

touch the rear plate.

Water flows on the

ground.

The melting water outlet does

not flow in the evaporative tray

above the compressor.

Attach the melting water outlet to

the evaporative tray.

The temperature in the

appliance is too low.

The temperature regulator is not

set correctly.

Set a higher temperature.

10) If foreseen.

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 59 60

Commentaires sur ces manuels

Pas de commentaire

Küppersbusch IKE236-0 Manuel d'utilisateur Page 22

Commentaires sur ces manuels

Produits connexes et manuels pour Congélateurs Küppersbusch IKE236-0